My Pressure Seal Machine Has No Power.
Most of our pressure seal machines have Emergency Cut Off Switches. Look for a round red switch on the machine and turn it in the direction of the arrow.
If your machine still does not have power, and you have an ES2000, ES3000, or ES5500, make sure that both fold plates are fully snapped into the machine.
If your machine still does not have power, next check the fuse which is typically located near where the electric cord plugs into the machine. Look for a tiny 1” rectangular door which can be opened. If the fuse looks blown, you can go to your nearby hardware store for a replacement. Be sure to unplug the machine before removing the fuse.
Lastly, if the above steps do not restore power, please call your servicing dealer or Paitec USA for further assistance.